TCAR-05A Tire Repair Set (CO2 repair kit bag box)

Supplier Information

Product Description

Bag packing/ bags

Nylon Co2 repair kit bag/ 1pc

Co2 cylinder 16g/ 5pcs

Rubber Solution 7ml/ 1pc

T-handle tire plug tool/ 1pc

T-handle screw drill/ 1pc

Tire seal 10cm x 5strips (4″)/ 1pc

Co2 connection pipe/ 1pc

Steel adapter/ 1pc

Multi-function pliers/ 1pc

20 bags/ CTN.

CUFT: 1’

N.W.:14.5kgs

G.W.:15.5kgs

1.	Before set up, make sure the switch is in the “closed” position, place the adapter on the inflator.
2.	Smaller hole attach CO2 at the bottom in clockwise direction.
3.	Attach the pipe to the tire and turn the inflator clockwise to insert air into tires with CO2 cylinder.

1.	Pull out the nail from tire.
2.	Clean the injury with the open end inserting tool.Following the direction of the injury and twist .
3.	Times in hole inside.
4.	Feed the seal string to open end inserting tool. Also using a little of solution on the surface of seal string.
5.	Insert the tool by hand into injury through the tire from outside to inside about 1 cm. Then twist it.
	Put out the tool directly.

more>Related Products of this Supplier