TBIC-03 Tire Repair Kit for Bike

Tire Repair Kit for Bike

Box packing/ boxes

Specification:

Co2 cylinder 12g/ 1pc

Co2 connection pipe/ 1pc

Rubber solution 7ml/ 1pc

metal rasp/ 1pc

Sand paper/ 1pc

Cold patch Dia. 19mm/ 2pcs

Cold patch 34 x 24mm/ 2pcs

Mini screw drill/ 1pc

Mini tire plug tool/ 1pc

Tire seal 10cm x 10strips (4”)/ 1pc

PP plastic box/ 1pc

Packing:

8 boxes/ color box

12 color boxes/ CTN.

CUFT: 0.9’

N.W.: 15.1kgs

G.W.: 16.1kgs

1.	Connect the tire & pipe.
2.	Prick & fasten the valve directly.

1.	Pull out the nail from tire.
2.	Clean the injury with the open end inserting tool.Following the direction of the injury and twist.
3.	Times in hole inside.
4.	Feed the seal string to open end inserting tool. Also using a little of solution on the surface of seal string.
5.	Insert the tool by hand into injury through the tire from outside to inside about 1 cm. Then twist it.
	Put out the tool directly.

1.	Rub off the part to be mended larger then the patch in size.
2.	Apply slight rubber solution to the part to be mended.
3.	Slowly take off the foil.
4.	When the rubber solution dries, paste the patch on the part to be mended and fixthe patch with a roller stitch.