Item No.ï¼HP-GW200
Single Diaphragm Pump – Steel Outer
Capacity : 2 Pots + 2 Spray Gun
Operating Pressure : 2.8 ~ 4.2 kg/cm² ( 40 – 60 psi )
Air Consumption : 0.06 ~ 0.11 m³/min ( 2-4 CFM )
Width x Depth x Height : 0.47m x 0.65m x 1m ( 18-½” x 25-½” x 40” )
Weightï¼33.5kg ( 74lbs )
Noise Under Operation : 75dB
Material of Inner Tank : Polyethylene
Max. Inner Tank Volume : Less than 19 Liters
Working Solvent volume : 2 Liters
**60sec→2sets of Spray Guns**
The Spary Gun Washer is suitable for the busy medium sized body shop. The tank is robustly manufactured and delivers sufficient solvent to clean two guns and pots in each washing cycle. The air supply is automatically cut off when the lid is opened. If it not stop, you can just turn off the valve at the air inlet.
